Steps
In Hub, open the Graphs tab.
Select the soil probe you want to view.
Open the Available Water Content graph.
Find the Water Events strip above the chart. It shows rain, the irrigation that pressure transducers (PTs) picked up, and scheduled irrigation.
Set the Zone Devices switch:
Off: shows only the devices at the probe's own spot, meaning a PT installed at the same point as the probe.
On: shows every irrigation device in the probe's zone (such as Drip 1 or Microspray), each in its own row.
Things to know
The legend and the scheduled irrigation events follow the switch.
By default, the switch is off for a probe that has a PT at its own spot, and on for any other probe.
After you flip the switch, Hub keeps your choice for all probes.
If there is no rain and no irrigation in the date range, the strip says "No water events in this date range" and lists the devices below it.
The switch does not show for a probe whose zone has no PTs.
Frequently asked questions
Why can't I see the Zone Devices switch? The switch shows only when the probe's zone has at least one pressure transducer (PT).
I changed the switch on one probe. Why did it change on my other probes? After you flip the switch, Hub keeps your choice for all probes.
Why does the strip say "No water events in this date range"? There was no rain and no irrigation in the selected date range. The devices are still listed below the strip.
What does the Water Events strip show? Rain, irrigation picked up by pressure transducers (PTs), and scheduled irrigation.